Tools
Work with nothing but the best! Our
EZ-Spray and Kwikee Sprayers are the perfect tools for getting the job
done right.
We do not ship to P.O. Boxes! Orders are processed M-F after payment is received.
|
EZ-SprayTM
Machine
 The
spray gun is a dual-plunger dispenser that holds two 750 ml
material cartridges (750 ml Part A + 750 ml Part B), totaling
1500 ml of material (3.75 lbs. /1.7 kgs.).
A static mixing tube is attached
to a disposable material cartridge, and Parts A + B are pumped
from the material cartridge through the mixing tube. Mixed
material is forced through a spray tip where it is met by
pressurized air and projected forward onto a model.
Controlling Material Delivered... Adjusting the plunger
control knob will vary the amount of the material forced through
the cartridge. Spray pattern can be altered by adjusting
the air volume control lever.
What
Powers The Gun?
End user provides an air compressor with a minimum rating of
90 psi at 5 CFM. It is important that the air line be dry,
and an air line desiccant is recommended.
Advantages vs. The EZ~SprayTM Machine And Other Spray
Systems
 |
EZ-SprayTM Junior
is convenient and easier to use. You can use it just
about anywhere.
|
|
No Clean Down/Maintenance -
There are no motors or pups, hoppers or hoses that can
become clogged with material, etc.
|
|
No Significant Upfront
Investment - There is no $8,000 investment in spray
equipment required. $20,000 and more if you choose a
spray machine from GRACO or other large equipment suppliers.
The upfront investment for the spray gun is $755.48 (end-user
cost).
|
|
New Materials To Spray - We're
introducing a new spray silicone rubber, a spray coating for
Styrofoam and a spray foam. We've improved our
EZ~SprayTM Plastic "mother mold/support shell"
formulation (less exotherm resulting in lower shrinkage and
higher impact resistance).
|
|
| EZ-Spray(TM) Machine |
$755.48 |
| The
EZ-Spray Machine is a low-cost, convenient, easy-to-use sprayer,
accommodating Smooth-On's cartridges containing spray rubber,
plastic, or foam. Contains spray gun and 2 spray tips.
Click here to see the
range of accessories and cartridges for this sprayer. |
|
| |
|
|
|
EZ-Spray Accessories |
Shipping billed separately. |
| |
|
|
|
|
Material Cartridges for
the EZ-Spray |
Case of Cartridges |
5 Gallon |
55 Gallon |
| EZ-Spray(TM) 45 Urethane Rubber |
$112.00
3 cartridge units with 4 mixers.
|
$455.00 |
$3,561.34 |
| EZ-Spray(TM) Silicone Rubber |
$131.86
3 cartridge units with 4 mixers. |
$1,047.70 |
$7,216.00 |
| EZ-Spray(TM) Urethane Plastic |
$112.00
3 cartridge units with 4 mixers. |
$415.00 |
$3,823.90 |
| StyroCoat(TM) Styrofoam Coating |
$112.00
3 cartridge units with 4 mixers. |
$603.27 |
$6,175.00 |
| EZ-Spray(TM) Rigid Foam |
$112.00
3 cartridge units with 4 mixers. |
$553.50 |
$5,025.50 |
| |
|
|
|
| |
|
|
|
|
Accesories for the EZ-Spray |
|
|
|
| Static Mixing Tubes - Small (For spraying plastic, foams &
urethane rubber) |
Bag of 10 |
$18.69 |
|
| Static Mixing Tubes - Large (For spraying silicone) |
Bag of 10 |
$19.53 |
|
| Spray Tip Assembly - Large |
|
$11.00 |
|
| Spray Tip Assembly - Small |
|
$11.00 |
|
| Flow Restrictors |
Bag of 10 |
$3.75 |
|
| |
|
|
|
